---
title: "Roland DP-10 vs Yamaha FC4A"
url: "https://mid1.com/compare/roland-dp-10-vs-yamaha-fc4a"
site: "mid1 (mid1.com)"
---

# Roland DP-10 vs Yamaha FC4A

Both are picks from our guide: Best Sustain Pedals (https://mid1.com/guides/accessories/best-sustain-pedals).

## Specs head to head

| Spec | Roland DP-10 | Yamaha FC4A |
| --- | --- | --- |
| Type | Continuous half-damper pedal | Piano-style pedal, half-damper capable |
| Half-damper support | Yes, full and half-damper compatible | Yes, on compatible keyboards |
| Cable | 2.2 m extended cable | 6 ft, 1/4" jack |
| Weight | 1.7 lb | 1.87 lb |
| Dimensions | 9.5 x 4 x 3 in | 4.33 x 11.81 x 3.15 in |

## Roland DP-10

Our rating: 9.1 out of 10.

Best for: Players who want the closest feel to an acoustic piano's damper pedal and a keyboard that can read it.

The Roland DP-10 is the pedal the r/piano thread's most specific recommendation pointed to: "I would go with a roland, its got the closest feel that ive experienced." At about $51, roughly double the SP-2 and slightly ahead of the FC4A, it is built as a real-feel continuous pedal rather than a simple switch.

It ships with a non-slip rubber plate built into the base, which Roland calls out for hardwood or slip-prone stages, and an extended 2.2 meter cable for setups with keyboards stacked on stands. It is full and half-damper compatible, so it reads continuous pressure on a supporting keyboard and still works as a plain switch pedal on anything else.

Half-damper response is only useful on a keyboard built to read it, and plenty of controllers and stage pianos treat it as a basic on/off input regardless of what the pedal sends. At roughly double the SP-2's price, you are paying for a feature a lot of setups will never use. It is also heavier and bulkier than either pedal below it.

## Yamaha FC4A

Our rating: 8.6 out of 10.

Best for: Players on a Yamaha or half-damper-capable keyboard who want closer-to-acoustic feel without paying Roland prices.

The Yamaha FC4A is the pedal the r/piano thread trusts by name: "Yamaha and Roland both made great pedals" was one of the thread's top replies. At about $29 it undercuts the Roland DP-10 by roughly half while still supporting half-damper response on keyboards built to read it.

It runs improved anti-slip rubber on the base, and Yamaha says mechanical noise has been reduced from earlier FC4 pedals, so it is quieter under a fast foot. Polarity is fixed by holding the pedal down while powering the keyboard off and back on rather than a physical switch. It also works as a general FS controller input for synths and drum machines.

Half-damper response only appears on a keyboard built to read it; on a switch-only input it just behaves like an on/off pedal. There is no physical polarity switch, only the power-cycle method. And it costs close to triple the SP-2 for feel many controllers cannot use.

---

Disclosure: mid1 may earn an affiliate commission on purchases made through our links, at no extra cost to the buyer. Commissions never change our picks.

Source: https://mid1.com/compare/roland-dp-10-vs-yamaha-fc4a